ISO 7207 ADF angular contact ball bearings

Dimension L:4.6250 in; Height T:1.8281 in; Diameter N:0.5469 in; Dimension A2:0.6563 in; Insert Bearing IB:Stainless Steel; Dimension A1:1.3750 in; Distance J:3.6250 in; Dimension DA:4.1875 in; Basic Static Radial Load Rating Co:3440 lbf; Shaft Diameter D:1 1/4 in;

Basic Static Radial Load Rating Co:6800 N; Sealed Speed Rating n3:14000 rpm; Oil Speed Rating n2:18000 rpm; Basic Dynamic Radial Load Rating C:11700 N; D:37.0000 mm; d:12.000 mm; Accessories:One Seal; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:14000 rpm; B:19.1 mm;

d:45.000 mm; Fillet Radius ra:1.00 mm; D:85.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; B:30.20 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:39000 N; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; Grease Speed Rating n1:5000 rpm;

ra max.:3 mm; db min.:433 mm; D:540 mm; Da max.:524 mm; rb max.:3 mm; Reference speed:800 r/min; r1,2 min.:4 mm; Calculation factor kr:0.2; Mass bearing:100 kg; Basic static load rating C0:4300 kN;

F:110 mm; Mass inner ring:0.35 kg; r, r1,2 min.:1.1 mm; B:30 mm; d:100 mm;

Associated eyebolt for handling:M 10; Mass lock nut:55 kg; Associated spanner:TMFN 80-500; B5:95 mm; d3:620 mm; G:Tr 480x5; h:20 mm; d2:528 mm; b:36 mm; Lock washer / Locking clip:MS 3196;

rs (min):3 mm; Dynamic (Cr):4.5 mm; Oil:73.000 kN; Grease:686 kN; with cylindrical bore:1 700 min-1; D:215 mm; B:73 mm; with tapered bore:2 000 min-1; Static (Cor):8.3 mm; d:100 mm;

Fatigue load limit Pu:28 kN; s1 max.:9.6 mm; D1 ≈:116 mm; d2 ≈:88.5 mm; d:75 mm; Misalignment factor k1:0.099; s2 max.:5.3 mm; D:130 mm; Da max.:121 mm; Limiting speed:2200 r/min;

Fillet Radius ra:1.00 mm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:15900 N; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:10200 N; B:15.00 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Oil Speed Rating Open/Shielded n2:14000 rpm; d:20.000 mm;

r1,2 min.:2.1 mm; d1 ≈:413 mm; Db max.:474 mm; Calculation factor e:0.68; Calculation factor Y2:0.87; Reference speed:1300 r/min; Fatigue load limit Pu:11 kN; Basic static load rating C0:500 kN; d:380 mm; r3,4 min.:1.1 mm;

ra max.:1 mm; r3,4 min.:0.6 mm; Snap ring in accordance with DIN 471:145x4; d1 ≈:113 mm; D:145 mm; d:95 mm; Snap ring Seeger:SW 145;   -:0.2 mm; das:110 mm; r min.:1.5 mm;

Reference speed:600 r/min; Da max.:445 mm; Calculation factor kr:0.3; B:118 mm; d:300 mm; Fatigue load limit Pu:300 kN; da min.:315 mm; Mass bearing:65.5 kg; das:344 mm; s max.:14 mm;

RG:1/4 NPT; A2:118.666 mm; Pa:5.65 kN; h:31.75 mm; Initial grease fill:136.08 g; R2:21.431 mm; P180°:30.2 kN; Cap bolt:2 x 1/2-13 UNC; P60°:75.6 kN; da:60.325 mm;

Oil Speed Rating n2:3200 rpm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2600 rpm; Oil Speed Rating Open/Shielded n2:3200 rpm; Grease Speed Rating Open/Shielded n1:2600 rpm; d:110.000 mm; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:180000 N; Basic Dynamic Radial Load Ra

Grease Speed Rating n1:3200 rpm; d:65.000 mm; B:61.90 mm; D:140.0000 mm; Basic Static Radial Load Rating Co:108000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:138000 N;